2D Cutting
Tube Cutting
3D Cutting
Intelligent Welding
Intelligent Cutting Head
Industrial Automation
Industrial Software
Combination
Controller
Combination
Combination
Controller
2D Cutting Head
Tube Cutting Head
3D Cutting Head
Notice: The version format of TubesT has changed from 7.1.61.15 to 2025V3.3 as shown below:
TubesT |
TubePro |
Available only when the software is updated |
2025V3 |
2025B (10.2502) |
Import drawing with ruled surface information, Identify Bevel (Typical drawing of a circular tube saddle joint with weld seam) |
2025V2 |
2025A (10.2501) |
1. Draw Common Bevel Part 2. Cyclone Cutting 3. File saving and reading: Even if the option to Export to older version is checked, and the file contains new features (functionality that requires an upgrade to use after version 25V2 is considered a new feature), the file will be automatically saved as a new version file and cannot be opened in older versions of the software. |
2025V1(1.61) |
18XX-V2 7.2432.0.xx (CAD in 1.61) |
When the option Exportto older version is not selected during file saving, the file can only be opened properly in TubePro after a version upgrade. If a new version file is exported and opened in TubePro or FACut-H with CAD V59 or earlier, a prompt will appear indicating that the file version is too high and requires a software upgrade. Notice: CloudNest is not available for versions from 25V1 to 25V2.12. |
1.59 |
7.31.225.3 (CAD in 1.57) |
Thermal Drilling Hole
*The new version of TubePro can read the fixed height of countersink file, while the old version requires to set the fixed height manually. The file of the new version can be opened in the old version, and vice versa. **For Thermal Drilling Hole, use TubesT version 59.1, and TubePro version 17xx, 225.3 (CAD in V57) |
1.57 |
7.31.224.0 |
Read the Kerf Compensate (Fixed Height) of co-edge toolpaths. |
1.55 |
7.27.200.7 |
Parts Combination |
1.51 |
7.27.200.2 |
1. Bevel-type weld scallops toolpath (generated through H-beam end face toolpath optimization and H-beam Y-bevel generation in Quick Sampling) 2. CAM flag in Profile Toolpath. |
1.49 |
- |
None |
1.47 |
7.23.180.4 |
1. H-beam compensation 2. H-beam Island co-edge 3. Manually set the flag position |
1.45 |
7.21.170 |
1. Custom profile toolpath contour |
1.43 |
10xxxx-7.19.160.4-20220811 (The temporary testing version of CAM in 10xx + CAD in 1.43) |
1. The Identical Co-edge (reverse) and 3-Cut Co-edge of TubesT Lite (1.43) requires CAD in 1.43. 2. All bevels (including bevels identified through *.igs files) and all Fly Cut are included in TubesT |
1.41 |
7.17.151.9 |
1. There is a known BUG when using TubesT version 1.41 with TubePro versions below 7.17.151.9. 2. While the Sawing Config was released in TubesT version 1.41, it was not included in the corresponding TubePro version 7.17.151.9. Users using the Sawing Config must switch to the trunk version of TubePro. |
1.39 |
7.17.150.3 |
1. Picking (Co-edge for Profile Toolpath, Break Curve, Join Cutoff Line) 2. Text (including batch+independent processing, fire fighting pipe marking, script marking, etc) |
1.37 |
7.15.145.2~7.17.150.2 |
1. Tapping Hole 2. Corrected Y-axis angle |
1.35 |
7.15.144.3~ |
Package |
1.31 |
7.0.15.142~ |
T-section Steel |
1.29 |
7.0.13.135~ |
Add Lead for Island Co-edge Optimize toolpath order based on B-axis soft limit. |
1.25、1.27 |
7.0.13.132~7.0.13.134 |
Island co-edge for Joint Lead Bridge Lead Out Scan Cut for Intersect Holes Male-Female Splice Lead for Microjoint Nudge |
1.23 |
7.0.13.128~7.0.13.131 |
The processing file format has been updated. When upgrading the nesting software TubesT, the TubePro must also be upgraded to version V7.0.13.128 simultaneously. |
1.21 |
7.0.13.106~7.0.13.126 |
Join Parts Join Nearest Lines without changing the layers Scan Cut |
1.17 |
7.0.11 |
|
1.15 |
7.0.9 |
|
1.13 |
7.07 |
Notice: The version format of TubesT has changed from 7.1.61.15 to 2025V3.3 as shown below:
TubesT |
TubePro |
Available only when the software is updated |
2025V3 |
2025B (10.2502) |
Import drawing with ruled surface information, Identify Bevel (Typical drawing of a circular tube saddle joint with weld seam) |
2025V2 |
2025A (10.2501) |
1. Draw Common Bevel Part 2. Cyclone Cutting 3. File saving and reading: Even if the option to Export to older version is checked, and the file contains new features (functionality that requires an upgrade to use after version 25V2 is considered a new feature), the file will be automatically saved as a new version file and cannot be opened in older versions of the software. |
2025V1(1.61) |
18XX-V2 7.2432.0.xx (CAD in 1.61) |
When the option Exportto older version is not selected during file saving, the file can only be opened properly in TubePro after a version upgrade. If a new version file is exported and opened in TubePro or FACut-H with CAD V59 or earlier, a prompt will appear indicating that the file version is too high and requires a software upgrade. Notice: CloudNest is not available for versions from 25V1 to 25V2.12. |
1.59 |
7.31.225.3 (CAD in 1.57) |
Thermal Drilling Hole
*The new version of TubePro can read the fixed height of countersink file, while the old version requires to set the fixed height manually. The file of the new version can be opened in the old version, and vice versa. **For Thermal Drilling Hole, use TubesT version 59.1, and TubePro version 17xx, 225.3 (CAD in V57) |
1.57 |
7.31.224.0 |
Read the Kerf Compensate (Fixed Height) of co-edge toolpaths. |
1.55 |
7.27.200.7 |
Parts Combination |
1.51 |
7.27.200.2 |
1. Bevel-type weld scallops toolpath (generated through H-beam end face toolpath optimization and H-beam Y-bevel generation in Quick Sampling) 2. CAM flag in Profile Toolpath. |
1.49 |
- |
None |
1.47 |
7.23.180.4 |
1. H-beam compensation 2. H-beam Island co-edge 3. Manually set the flag position |
1.45 |
7.21.170 |
1. Custom profile toolpath contour |
1.43 |
10xxxx-7.19.160.4-20220811 (The temporary testing version of CAM in 10xx + CAD in 1.43) |
1. The Identical Co-edge (reverse) and 3-Cut Co-edge of TubesT Lite (1.43) requires CAD in 1.43. 2. All bevels (including bevels identified through *.igs files) and all Fly Cut are included in TubesT |
1.41 |
7.17.151.9 |
1. There is a known BUG when using TubesT version 1.41 with TubePro versions below 7.17.151.9. 2. While the Sawing Config was released in TubesT version 1.41, it was not included in the corresponding TubePro version 7.17.151.9. Users using the Sawing Config must switch to the trunk version of TubePro. |
1.39 |
7.17.150.3 |
1. Picking (Co-edge for Profile Toolpath, Break Curve, Join Cutoff Line) 2. Text (including batch+independent processing, fire fighting pipe marking, script marking, etc) |
1.37 |
7.15.145.2~7.17.150.2 |
1. Tapping Hole 2. Corrected Y-axis angle |
1.35 |
7.15.144.3~ |
Package |
1.31 |
7.0.15.142~ |
T-section Steel |
1.29 |
7.0.13.135~ |
Add Lead for Island Co-edge Optimize toolpath order based on B-axis soft limit. |
1.25、1.27 |
7.0.13.132~7.0.13.134 |
Island co-edge for Joint Lead Bridge Lead Out Scan Cut for Intersect Holes Male-Female Splice Lead for Microjoint Nudge |
1.23 |
7.0.13.128~7.0.13.131 |
The processing file format has been updated. When upgrading the nesting software TubesT, the TubePro must also be upgraded to version V7.0.13.128 simultaneously. |
1.21 |
7.0.13.106~7.0.13.126 |
Join Parts Join Nearest Lines without changing the layers Scan Cut |
1.17 |
7.0.11 |
|
1.15 |
7.0.9 |
|
1.13 |
7.07 |