Contact Sales

CN
SeekCenter in Cutting
  • Software Download
  • Manual
  • Tutorial
Home » Software » TubePro
  • Auto Feed
  • Calibrate B Axis Center
  • Center Methods for Free-formed Tubes in TubePro
  • Center Methods
  • Centering Introduction
  • Corner Technique
  • Cycle Task
  • Eliminate Burns on Parts End
  • Follower Stay Position Config Error
  • Following Holder
  • Change Language and Unit
  • Check and Adjust R Corner
  • Split Tube Length
  • How to Improve Holes Position Precision
  • Locate to Tube Front End
  • Manual Center
  • Parameters Backup and Restor
  • Pause-PLC-Cont
  • Related Files Formats of Tube Cutting
  • Return Origin
  • SeekCenter in Cutting
  • Single Face Leveling
  • Square Profile Precision
  • Symmetric Arc Center
  • TubesT：Optimizaze H - beam flange toolpath
  • TubesT：Optimize H-beam web toolpath
  • TubesT - CypWizard Plugin Installation & Operation Guide
  • How to Change the Threshold for Tube Size Error
  • Tube Size Error
SeekCenter in Cutting

The tube center might change during the cutting process. This usally happens when cutting a long tube, for the tube might drop because of gravity and this will affect cutting precision. You can add SeekCenter points on the to-be-cut drawings, then it will align the tube to the center before machining.

Steps

  1. Add SeekCenter Points

      Select single graphic and click SeekCenter at the toolbar on the left to set the start point as SeekCenter.

      Select multiple graphics and click SeekCenter at the toolbar on the left to set SeekCenter Points automatically by setting Min Gap in part or enabling Each Part SeekCenter.

      Min Gap in Part: All graphics within this distance in one single part will be added a SeekCenter point.

      Each Part SeekCenter: It will add a SeekCenter point for each part.

  1. Set Auto Center methods in process

You can set Auto Center methods in Layer---Part Features---Center Type.

SeekCenter in Cutting 4757view

The tube center might change during the cutting process. This usally happens when cutting a long tube, for the tube might drop because of gravity and this will affect cutting precision. You can add SeekCenter points on the to-be-cut drawings, then it will align the tube to the center before machining.

Steps

  1. Add SeekCenter Points

      Select single graphic and click SeekCenter at the toolbar on the left to set the start point as SeekCenter.

      Select multiple graphics and click SeekCenter at the toolbar on the left to set SeekCenter Points automatically by setting Min Gap in part or enabling Each Part SeekCenter.

      Min Gap in Part: All graphics within this distance in one single part will be added a SeekCenter point.

      Each Part SeekCenter: It will add a SeekCenter point for each part.

  1. Set Auto Center methods in process

You can set Auto Center methods in Layer---Part Features---Center Type.

Downloads